Description
Scraper Specifications
Model 3002 • Model 3004
Capacity, heaped
3 cubic yards (approx.)
Width of cut
95 3/4″
Overall width
111″
Box Width (front to rear gate)
43″
HP Requirements
50 and up
Weight
Approx. 2000 lbs.
Hydraulic Requirements
One double-acting control valve
Blade
Removable, high carbon steel (3-piece carbon steel frost blade)
Tires
95L x 15, 6-ply included with scraper
Model 5002 • Model 5004
Capacity, heaped
5 cubic yards (approx.)
Width of cut
95 3/4″
Overall width
113″
Box width (front to rear gate)
48″
HP requirements
70 and up
Front dump spreading depth
4″-12″
Weight
Approx. 4000 lbs.
Hydraulic Requirements
One double-acting control valve
Blade
Removable, reversible, 3-piece pacal steel (8″ wide frost blade)
Model 7002 • Model 7004
Capacity, heaped
7 cubic yards (approx.)
Width of cut
95 3/4″
Overall width
113″
Box width (front to rear gate)
48″
HP requirements
85 and up
Front dump spreading depth
4″-12″
Weight
Approx. 5000 lbs.
Hydraulic requirements
One double-acting control valve
Blade
Removable, reversible, 3-piece high carbon steel (8″ wide frost blade)
Tires
(50 psi) 12.5 L x 16, 12-ply or 14-ply
XL models in tandem
When you move a lot of dirt, the Rowse Tandem Model scrapers will keep you moving for years with a combined capacity of up to 14 cubic yards when heaped. Rowse builds Tandem Scraper Models XL500 and XL700. Both have standard 3-piece high carbon steel cutting edges with complete operation controlled by two double-acting control valves. The Tandem Models all have the same dependable standard features as the corresponding regular models.
The Tandem XL500 and XL700 Scrapers are equipped with dual rear wheels for stability and added weight capacity. A rear push bar for added loading is standard.
The gooseneck hitch of the rear scraper attaches to the 3? welded ball mounted inside the push bar. Very little additional horsepower is needed to operate the scrapers in tandem. Each scraper is loaded separately.
A depth gauge is standard on the 500, 700, XL500 and XL700 models. At a glance, the gauge indicates to the operator that the blade is at ground level for a more precise operation.
XL Specifications
Tandem models correspond to regular models with the following exceptions.
Model XL500
Weight
Approx. 4400 lbs.
Hydraulic requirements
Two double-acting control valves
Spindles
2″
Tires
(6) 11L x 15 8-ply
Model XL700
Weight
Approx. 5630 lbs.
Hydraulic requirements
Two double-acting control valves
Spindles
2 3/4″
Tires
(6) 12.5L x 16, 12-ply or 14-ply